3onedata RACK2000A Manuale di installazione rapida - Pagina 2
Sfoglia online o scarica il pdf Manuale di installazione rapida per Cremagliere e cavalletti 3onedata RACK2000A. 3onedata RACK2000A 3. Ethernet media converter rack
Stampa la paginaStep 1
Select the device installation location to reserve
sufficient size.
Step 2
Place the device on the surface plate of the rack,
and then adopt 4 screws to install the mounting
lugs on the left and right sides on the rack.
Step 3
Check and confirm the product is firmly installed
on the rack, then mounting ends.
Disassemble the device
Step 1
Device power off.
Step 2
Unscrew the fixing screw of mounting lug on the
rack.
Step 3
Remove the device from the rack, disassembling
ends.
【Optional Subset】
100M Ethernet media converter
1.
Fiber port 100M rate indicator (100)
2.
Copper port 100M rate indicator (100)
3.
100M fiber port
4.
Fiber port connection status indicator (Link/Act)
5.
Copper port connection status indicator (Link/Act)
6.
Fiber port duplex mode indicator (FDX)
7.
Power supply connection status indicator (PWR)
8.
100M copper port
9.
DC5V power supply input end
Gigabit Ethernet media converter
1.
Copper port 100M rate indicator (100)
2.
Copper port connection status indicator (TP-TX)
3.
Gigabit fiber port
4.
Fiber port connection status indicator (FX)
5.
Power supply connection status indicator (PWR)
6.
Copper port gigabit rate indicator (1000)
7.
Copper port duplex mode indicator (DUP)
8.
Gigabit copper port
9.
DC5V power supply input end
RS-232 interface fiber MODEL
1.
Fiber port sending data indicator (TXD)
2.
100M fiber port
3.
Power supply connection status indicator
4.
Fiber port receiving data and connection alarm
indicator (RXD)
5.
RS-232 serial port
6.
DC5V power supply input end
RS-485/422 interface fiber MODEL
1.
Fiber port sending data indicator (TXD)
2.
100M fiber port
3.
Power supply connection status indicator
4.
Fiber port receiving data and connection alarm
indicator (RXD)
5.
RS-485/422 serial port
6.
DC5V power supply input end
【RS-232 Serial Port】
The serial port of RS-232 interface fiber MODEL
adopts DB9 female connection mode, the pin
definition as follows:
Pin NO.
2
3
Pin definition
TXD
RXD
【RS-485 Serial Port】
The serial port of RS-485/422 interface fiber
MODEL adopts 5-pin terminal blocks, the pin
definition as follows:
Pin NO.
1
2
3
RS-485
GND
-
-
RS-422
GND
R-
R+
【Power Supply Connection】
DC power supply
Professional communication power supply is
embedded in the rack, which supports dual
power supply optional. Dual power supply
device, when one power supply fails, it can
immediately switch to another power supply to ensure
the device continuous power supply. Power supply input
range: 100~260VAC.
【Indicator】
100M Ethernet media converter
Type
LED
Status
Description
ON
100Mbps
100
OFF
10Mbps or out of service
Fiber port link is well
ON
connected
Fiber
port
Link/Act
Blinking
Data is transmitted
Fiber port link is
OFF
disconnected
FDX
ON
Full duplex mode
5
GND
4
5
D+
D-
T+
T-