Dancover Borneo HE94010 Manuale d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'uso per Riscaldatore per patio Dancover Borneo HE94010. Dancover Borneo HE94010 6. Infrared patio heater
Stampa la pagina
Check if the voltage indicated on the nameplate of the appliance corresponds to the local mains voltage before you connect
the appliance.
The appliance is not to be located directly below an electrical wall socket.
The casing and the front cover of the appliance become extremely hot during operation. Pay attention that, no combustible
materials (due to wind or other environmental influences) covers or obstructs the appliance, such as curtains, marquees,
flags, plastic foil etc.
Do not touch the appliance. Caution! Risk of scald injury!
In case of improper use, there is a risk of electrical shock and/or fire hazard. Operation of the appliance must be discontinued
and remove the mains plug immediately. Do not try to repair the appliance by yourself. Please contact with the service agent
or a suitably qualified electrician for maintenance.
Remove the plug from the power outlet and wait until the appliance is sufficiently cool before cleaning.
Keep out of reach of children. In order to keep children from dangers, never leave them unsupervised with the heater.
Consequently, when selecting a suitable location, do so in such a way that children do not have easy access.
Specifications
Voltage (V)
Power consumption (W)
Dimensions L×W×H (mm)
Weight (kg)
IP
Infrared receiving Angle
The control distance(M)
Battery type
Remote Control Instructions
Button
Up Arrow
Max
Down Arrow
On
Off
220‐240～ 50Hz
2000W
574.0×100.0×145.0
2.8
IP65
60°±5°
6
2 x AAA size1.5V
Graphic
Feature
Up one heating level
The heater goes directly to the highest heating
level.
Down one heating level
To switch the heater on:
Press ON. The patio heater has a soft start
function of 33% power. 4 seconds after the
heater has been turned on, it will automatically
switch to the last heating level used. In case of
the first‐time use, after 4seconds the heater will
automatically switch to 100% power.
To switch the heater off:
Press OFF. The heater will switch to standby
mode(the receiver indicator will light up).