cascade corporation J Series Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Utensile elettrico cascade corporation J Series. cascade corporation J Series 18.

NSTALLATION

Attachment Installation

IMPORTANT: Integral attachment installation is an OEM or

dealer responsibility. Some of the following steps may or

may not be required, but are shown for reference.

Refer to the appropriate OEM Service Manual for service

and repair procedures.

Integral attachment carriage and

additional components should

be installed in mast per OEM

specifications and procedures.

NOTE: See OEM for installation

details on load roller, sidethrust

roller, chain anchor, etc.

Install hoses

CAUTION: Allow for 6 inches sideshifting

movement in each direction ('rolling' hose

arrangement recommended). Some

attachments vary in total sideshift. Allow for

movement in each direction.

6082563-R2 EN

FP1168.eps

Sideshift Right

(Sideshifting Fork Positioner shown)

WARNING: Verify that the overhead hoist

and chains or straps are rated for the weight

of the attachment. Refer to nameplate for

attachment weight.

Flush supply hoses

Connect supply hoses to supply terminals

and connect together using union fittings as

shown.

Operate auxiliary valves for 30 sec.

Remove union fittings.

Forks IN

Sideshift Left

Back (Driver's) View

FP0726.eps

Forks OUT

FP1141.eps