Abu Garcia Orra Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Attrezzatura da pesca Abu Garcia Orra. Abu Garcia Orra 6. Low profile

The spool tension knob controls how fast the spool spins when casting. It is located on the

sideplate of the reel next to the handle. With the rod-reel-line-lure properly assembled, place the

tip of the thumb on the line to hold the spool. Depress the thumb bar with the pad of your thumb

to disengage the gears. Allow the lure to drop to the ground. If the lure does not fall when the

thumb bar is depressed, turn the spool tension knob counterclockwise (left) to reduce tension on

the spool. If the lure falls to the ground and the spool continues to rotate, spool tension is too

loose. Rotate the knob clockwise (right) to increase tension. Additional casting brakes, if

applicable, are designed for fine tune adjustment.

It is normal to experience backlashes when learning how to cast a low profile reel. In the event

that you are just learning how to cast, tighten the spool tension knob an extra ¼ to ½ a turn and

slowly back it off as you learn to cast.

G. REMOVING THE SIDEPLATE

Orra™ reels are equipped with a removable palm sideplate that allows access to the spool. To

open the sideplate, slide the spring-loaded sideplate bar away from the palm sideplate with your

thumb. While holding the sideplate bar in the "open" position, twist the sideplate in an upward

motion until it reaches the stop position. The sideplate can now be removed.

H. REEL FUNCTION

How to Adjust the Braking System: Orra™ reels feature the adjustable MagTrax™ magnetic

brake system that delivers excellent casting control. For maximum casting distance and minimal

tendency of line over run, it is necessary to adjust the braking system to match the weight of the

lure and angler preference.

- MagTrax™ Brake -

The MagTrax™ magnetic brake delivers consistent braking pressure throughout the entire cast

resulting in smooth, controlled casts. A turn of the dial towards the "MAX" setting moves the