Airvolution Esatto EUM75 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Cappa di ventilazione Airvolution Esatto EUM75. Airvolution Esatto EUM75 16. Undermount rangehood 52cm ⁄ 75cm ⁄ 90cm

Stampa la pagina

By ensuring proper cleaning and maintenance of your Residentia

rangehood, you can ensure that it will have a long and fault free operation.

Cleaning the grease fi lters

Cleaning the cooker hood

Changing a light globe

Optional carbon fi lter (optional)

C L E A N I N G & M A I N T E N A N C E

Keeping this fi lter clean will keep the rangehood extraction performance at

an optimum. Please strictly follow the guidelines below.

– The grease fi lter mesh is made of high-density stainless steel. Please

ensure you never use a corrosive detergent during cleaning.

– Method 1: Put the mesh into 40-50°C clean water with a small amount of

regular dishwashing liquid, and soak for 2-3 mins. Wear gloves and clean

with a soft brush. Please do not apply too much pressure, as the mesh is

delicate and will damage easy.

– Method 2: You can wash your rangehood grease fi lters in your

dishwasher, however please ensure they aren't washed at a temperature

above 60° C degrees.

To protect the main body of your rangehood from corrosion or stains, the

cooker hood should be cleaned with hot water with a non-corrosive detergent

every two months. For stubborn stains or marks, you can try using a specifi c

stainless steel cleaner available from most supermarkets.

Warning!

– Keep the motor and other spare parts free from water, as this will cause

damage to the appliance.

– Before cleaning the rangehood, always switch the power off at the outlet

and unplug the rangehood.

– If your rangehood has a damaged plug or cord, please ensure your

rangehood remains unplugged and contact the Residentia Support team

for further assistance. Any electrical work should only be completed by a

suitably licenced and authorised person.

– If you're using a carbon fi lter, it should never be exposed to heat.

In the event of a broken globe:

– Disconnect the rangehood from the power supply.

– Remove the grease filter and remove the 2 screws on the fascia panel.

Unplug the connecter on the lamp and push out the lamp from inside.

–

Replace the broken lamp and connect the lamp with cable again.

–

Re-fit the fascia panel with the 2 screws & grease filter.(previously removed).

An optional carbon fi lter can be purchased separately and installed in your

undermount rangehood. Normally the activated carbon fi lter should be

changed every three to six months according to your volume of cooking.

Activated carbon fi lter cannot be washed or recycled. The installation

procedure of activated carbon fi lter is as below.

– Remove the grease fi lters.

– Insert the fi rst activated carbon fi lter into the unit and turn it in anti-

clockwise direction. Then repeat the same on the other side.

– Re-insert the grease fi lters.

Note:

Please do not use a corrosive detergent, or abrasive

clothes, as it will damage the body.

When the activated carbon fi lter installed, the suction

power will be lowered.