Duke 59 Series Manuale di installazione e funzionamento - Pagina 18
Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Forno Duke 59 Series. Duke 59 Series 20. Ovens with “zp” control panel
Anche per Duke 59 Series: Manuale d'uso (20 pagine)
Installation and Operation of 5/9 Electric Convection Oven
These maintenance instructions are for the use of qualified service personnel only. Service by other than
qualified personnel may result in damage to the oven and/or injury to the operator.
Qualified service personnel are those individuals, firms, companies or corporations which either in person
or through an agent are engaged in and responsible for repair or servicing of commercial food preparation
equipment, who are experienced in such work, familiar with all precautions required, and have complied with
all requirements of state and local authorities having jurisdiction.
If you should require assistance in the selection of a qualified service agency, please contact Duke Manufacturing
Co.'s Service Department at 800-735-3853.
A. ADJUSTMENTS
Quite often malfunctions, which are attributed to defects, may be repaired by adjusting certain parts rather
than replacing them.
B. DOOR SWITCH ADJUSTMENT
You may also wish to adjust the door switch. The door switch is located behind the combustion compartment
cover, on the right side. The door switch is activated by a cam, which is mounted to the door's hinge pin with
a setscrew.
1. Open the door fully.
2. Remove the lower cover by loosening the three
screws located inside the door opening.
3. Position the door so it is nearly closed but not
latched.
4. To adjust the cam loosen the setscrew and rotate
the cam until you hear the switch click.
5. Tighten the setscrew in the cam. Test the door to
make certain the switch will make contact with
the doors closed.
6. Torque setscrew to 60 in-lbs.
7. Replace the cover.
The door switch is located in a heated zone. Care
should be taken to avoid burns.
18
MAINTENANCE INSTRUCTIONS
Door
Set
Cam
Screw
Door
Switch