Duke HDC3 Manuale di servizio - Pagina 7

Sfoglia online o scarica il pdf Manuale di servizio per Elettrodomestici da cucina Duke HDC3. Duke HDC3 20. Foodservice equipment

Stampa la pagina

WARNING:

BEFORE ANY REPLACEMENT

PROCEDURE BEGINS, THE HDC3/

HDC6 MUST BE ISOLATED FROM

THE POWER SOURCE TO PREVENT

POSSIBLE ELECTRICAL SHOCK.

TOOLS REQUIRED

The only tools required are normal hand-tools.

CONTROL DISPLAY

DISPLAY

On/O

Function Control

Button

Figure 6. Control Display

The location of the Control Display will vary by

application and cabinet choice. It is mounted from

the front and is held in place by four screws.

1. Place the Main Power On/Off Switch in the off

position.

2. Disconnect the Dry Channel unit from its

power source. Use proper Lockout/Tagout

procedures.

3. Remove the four screws securing the Control

Display and move it away from mounting

surface.

COMPONENT REPLACEMENT

HEAT ON

READY

Select

Buttons

Service Manual for Dry Channel HDC3/HDC6 Units

4. If the Control Display is to be completely

removed, tag and disconnect the wires.

5. Remove Control Display.

6. Reverse the procedure to install Control

Display.

NOTE: The following Control Display component

removal is based on the Control Display having

already been removed from its mounting

surface.

BEFORE ANY REPLACEMENT

PROCEDURE BEGINS, THE HDC3/

HDC6 MUST BE ISOLATED FROM

THE POWER SOURCE TO PREVENT

POSSIBLE ELECTRICAL SHOCK.

CONTROL BOARD OR MYLAR COVER

D R Y

C H A

N N E

L T E

M P E

R A T

U R E

Figure 7. Exploded View of Control Display

1. With the Control Display removed from its

mounting surface, tag and disconnect wires.

2. Remove the four cover retaining nuts.

WARNING: