Airwater Baltik Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Distributore d'acqua Airwater Baltik. Airwater Baltik 11.

Stampa la pagina

1. Troubleshooting

The warm-water faucet (white

tab) or the hot-water faucet (red

tab) goes in the left hand socket

(facing the cooler). Insert with

nozzle at 270°, push hard and

turn counter-clockwise.

13. Re-install the floater. Make sure that the opening of the floater

faces upwards.

14. Insert the no-spill cone on the water cooler (with the blue filter in

place), pressing it down and strongly enough so that it engages

all around (tab should be facing front of cooler). The locking

mechanism ensures the end-user that the cone remains on the

water cooler when the bottle is removed.

15. Re-install the black ring, by placing it on top of the cooler hous-

ing, then turn it clockwise so that it locks in position;

16. Install the water bottle and check for leaks (See section "Start

using the cooler", paragraph 3).

17. Plug the cooler to a power outlet.

b) Hot and Cold Model

For the Hot & Cold model, you should not

reservoir; it can be cleaned with a cleaning solution on a clean

cloth. Start with the hot-water tank first, so go to the next para-

graph.

Hot water tank

We recommend cleaning the hot water tank at least once a year.

Because the water is maintained at high temperatures, the risk of

bacteria being present is quite low. However, in many areas of the

world, it is necessary to drain out the mineral deposits because

they can disrupt the temperature readings and lead to over-heating

of the water.

remove the cold-water

1. Unplug the

cooler.

2. Remove the bottle.

3. Empty the hot water by draining it through the hose that is locat-

ed near the rear grill.

4. Empty the cold-water reservoir, using the cold-water faucet (blue

trim).

5. Remove the ring on top of the cooler.

6. Remove the "no-spill" cone by strongly pulling it upwards by the

tongue located on one side of the cone. Then, remove the blue

part (filter), which must not be cleaned with the no-spill cone. The

filter should either be cleaned with a wet rag or replaced;

F I L T E R

7. Remove the floater inside the cold-water reservoir. Do not remove

the diffuser tube.

8. Remove the drip tray in front of the cooler.

F I L T E R