3Sense GPS-TS Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per GPS 3Sense GPS-TS. 3Sense GPS-TS 14.

4. Normal Operating Mode and Alternative Device States

The product has 3 LEDs, 2 external push buttons and a micro-USB connector.

The LEDs are:

- Battery charge – This LED turns RED while the product is charging the battery. In addition,

it will turn GREEN while the device it transmitting to the Sigfox network.

- MCU – this LED will flash with a code that relates to battery level.

- GPS – this LED will flash slowly if the GPS is on and there is no location fix and will flash

shortly when the GPS has a location fix.

The 2 push buttons are:

- ON/OFF button – if pressed for more than 2 seconds it will change the product state from

ON to OFF and from OFF to ON. When the product is turned ON it will flash the MCU and

GPS LEDs once at the same time. When it is turned OFF, it will flash the MCU and GPS LEDs

twice at the same time. If pressed for less than 2 seconds and the device is ON, it will

report the battery level using the MCU LED.

- The SOS button – When the device is ON, if pressed it will generate an event (if enabled)

that can be sent to the Sigfox network.

4.1. Send Data

The configured publication time (Normal or Alarm Publication Time) for each sensor will naturally

limit the data transmissions executed by GPS-TS. However, the device may be forced to send its

readings after briefly pressing its ON/OFF Button 1 time.

LED Indicator will flash green only to show that the device is configuring its Communications

Module.

www.3sense.tech

This device is part of 3Sense product family

Nov. 2018