Danfoss VLT FC Series Manuale di istruzioni - Pagina 9
Sfoglia online o scarica il pdf Manuale di istruzioni per Controllore Danfoss VLT FC Series. Danfoss VLT FC Series 11. Igbt module replacement for d1h–d8h drives
Anche per Danfoss VLT FC Series: Manuale di installazione (12 pagine), Manuale di istruzioni per l'installazione (6 pagine), Manuale di installazione (8 pagine), Manuale di istruzioni per l'installazione (6 pagine), Manuale di installazione (6 pagine)
Stampa la pagina
The functions of the input tags are:
Name
Type
EnableIn
Boolean
Run
Boolean
Reverse
Boolean
Reset
Boolean
MRV
Real
The function of the output tags are:
Name
Type
Ready
Boolean
Running
Boolean
Warning
Boolean
Alarm
Boolean
MAV
Real
Current
Real
®
VLT
MCA 121 EtherNet/IP Add On Instruction
Figure 9
Description
Activates the AOI if set to true (1)
Set to true (1), starts the Motor
Set to false (0); set the Motor direction to clockwise (CW).
Set to true (1); Reverses the Motor direction to counter clockwise (CCW) If the motor has
to run in CCW, parameter 4-10 must be set to "Both directions".
In transition from 0 to 1, a fault trip can be reset
Main Reference Value. Speed set point in %. of nominal motor speed
Description
If true (1) the motor can be started. If false (0) the drive has a local stop signal activated
(e.g. LCP stop, terminal 27=0) or an alarm that prevents the drive from being ready.
If true (1) motor is energized
If true (1) the drive has a active warning
If true (1) the drive has a active alarm
Main Actual Value. Actual motor speed in % of nominal motor speed
Motor current in Amps
®
MI3xxxxxxx - VLT
is a registered Danfoss trademark
9