cashco 1164 Manuale di installazione, funzionamento e manutenzione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione, funzionamento e manutenzione per Unità di controllo cashco 1164. cashco 1164 8. Back pressure / relief regulator
Anche per cashco 1164: Manuale di installazione, funzionamento e manutenzione (9 pagine)

cashco 1164 Manuale di installazione, funzionamento e manutenzione
VIII. PARTS ORDERING INFORM ATION
There are three methods to obtain parts ordering information/numbers. These methods are listed be low, in order
of ease of entering. The least expensive method is to utilize parts in kits where possible.
METHOD A - USE OF PRODUCT CODE.
Step 1. If available, obtain the 18 character pro duct
code num ber from:
a. The Bill of Materials sheet at tached here in.
b. The metal tag at tached to the reg u la tor.
-
7 -
Step 2. Identify which kits or parts are desired from
the following:
a. The Bill of Materials sheet at tached here in,
or refer to the cross-sec tion al draw ings.
b. Standard maintenance parts for a basic
regulator (no options) are in clud ed in the
Parts Kit Number table below. Kit "A" con-
tains seal(s) diaphragm(s) and gasket(s).
Kit "B" con tains trim re place ment parts
plus seal(s), diaphragm(s) and gasket(s).
Step 3. Contact your local Cashco, Inc., Sales Rep-
resentative and spec i fy the product code
num ber along with a description of any parts
not included in the kits below. Costs of re-
quired parts (and kits) can be given by the
Sales Rep re sen ta tive.
The shaded parts kit numbers below represent an abbreviated identifi cation number for a basic regulator (no options).
Trim Designation
S1 & S2
6
PARTS KIT NUMBERS
Kit
No.
Abbreviation
A
S1
B
S2
B

SECTION VIII

METHOD B - NO PRODUCT CODE AVAILABLE- DIS-
AS SEMBLED REGULATOR.
Step 1. Determine all available information from
Step 2. Determine construction of trim:
Step 3. With the information from Steps 1 and 2 pre-
METHOD C - NO PRODUCT CODE AVAILABLE- AS-
SEMBLED REGULATOR IN-SERVICE.
Step 1. Determine all available information from reg u -
Step 2. Contact your local Cashco, Inc., Sales Rep
Step 3. Sales Representative will contact the fac tory
Step 4. Await the Sales Representative's return con-
(KIT NOS. SHADED)
3/4" & 1"
AB5-AS1K-A
AB5-BS1K-A
AB5-BS2K-A
reg u la tor's met al tag.
a. Serial number (5-digit).
b. Regulator "Type" or "Model" number.
c. Size (may have to observe body con-
nec tion).
d. Spring range.
e. Trim designation number (if avail able).
a. Metal or composition (soft) seat?
vious, contact your local Cashco, Inc., Sales
Rep re sen ta tive for the proper iden ti fi cation
num bers to use, and the parts costs.
la tor tag using Step 1, Method B.
with the above information.
to de ter mine the original internal con struction.
Fac to ry will relay in for ma tion to the Sales Rep-
re sen ta tive.
tact with the proper part numbers and cost.
Size
1-1/2" & 2"
AB8-AS1K-B
AB8-BS1K-B
AB8-BS2K-B
IOM-1164