CashConcepts CCE 140 Manuale - Pagina 10

Sfoglia online o scarica il pdf Manuale per Sportello di cassa CashConcepts CCE 140. CashConcepts CCE 140 18. Electronic counterfeit money detector
Anche per CashConcepts CCE 140: Manuale d'uso (9 pagine)

Stampa la pagina
CCE – Cash Concepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.gmbh
Report-Function
Pressing the STA - key in testing mode you will have the opportunity
to list the tested and accepted notes in the Report menu.
By pressing several times STA you can switch between different
currencies and reports back and forth.
In the first display, you get a total overview of the currencies with the
indication of the number of accepted notes and the total value of
these notes.
In the second evaluation, you will receive a detailed overview of the
number of accepted notes per value.
To delete the stored data, press the STA button once and then press
the CUR button for approx. 2 sec. You will see the message "Clear
Data".
Sleep mode and clearing the display
Sleep mode
The CCE 140 enters after 5 minutes without use the energy saving mode and turns off the display. If the device is in sleep mode,
you can continue checking banknotes, because by the insertion of a note, the device will immediately return to active mode.
After 20 minutes, the device shuts off completely and must be turned on again. To turn it on and hold the ON / OFF button
pressed for about 2 seconds.
Error Management and Servicing
Cleaning of the sensors
Through the banknotes and settling dust deposits will occur on the sensors of
the machine. These leads to increased non-detections of genuine banknotes.
Therefore clean periodically the sensors of CCE 140. Turn off the machine
when cleaning the unit in general and unplug the power supply.
1
Reach into the input shaft of the unit and lift it up.
2
With a soft brush and cleaning cloth you can clean the sensors (see
arrows in the picture) and remove the dirt from the transport belts.
3
By using special cleaning towels you can maintain the sensors optimal.
EN