CashConcepts CCE 333 Manuale - Pagina 13

Sfoglia online o scarica il pdf Manuale per Sportello di cassa CashConcepts CCE 333. CashConcepts CCE 333 17.

CashConcepts Europe GmbH

Kemptener Straße 99 – D-88131 Lindau / Germany

Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20

Email: [email protected] / Web: www.cce.tm

Changes in the setup menu

Please change the setup menu only after consultation an engineer of CashConcepts. By the change of the preset values it can come

to false counting or increased refusals of banknotes.

Hold by turning on of the device the "Mode" – button pressed to enter the setup menu. With the help of the "MODE" key you

can navigate between the different sensor settings. By pressure of the key "ADD" you raise the sensitivity or with "BAT" reduce

the delicacy of the suitable sensor.

Message in the display

Width sensitive level

UV sensitive level

MG/MT sensitive level

Color sensitive level

IR sensitive level

Paper sensitive level

Factory setting

If you want to restore the factory settings, please hold by turning on of the device the "CLR" key pressed and then confirm once

with "RESTART". Then the factory settings are loaded again.

By the transport and by wear of the transport roles in the upper area a post adjustment of the feeder can be necessary. At the

rear side of the machine is a set wheel which can be easily pressed a little down and changes then by tricks the pressure on the

banknotes. The set wheel must be pressed down while adjusting to prevent unintentional changing of the pressure.

If the CCE 333 draws not only one but also several banknotes, turn the set wheel in the direction of "-" sign and during you press

the set wheel down.

If the CCE 333 does not draw in the banknotes, turn the set wheel in the direction of "+" sign and during you press the set wheel

down.

Sensor

Format (height)

UV – Sensor

MG/MT – Sensor

CIS – Sensor

IR – Sensor

Thickness of the banknote

Factory setting