Duncan Fodder Chopper Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Macchine agricole Duncan Fodder Chopper. Duncan Fodder Chopper 14.

Stampa la pagina
SAFETY - General (Continued)

Practise Safe Maintenance

Keep the machine in safe working condition. Routine maintenance
and regular servicing will help reduce risks and prolong the life of the
machine.
General Maintenance
Accidents occur most frequently during servicing and repair. The
following general rules must be followed when maintaining or working
with machinery:
•
All operating and maintenance manuals must be
read before and referred to while using or servicing any
piece ofequipment.
•
Turn off all machinery power sources and isolate the
machine before making adjustments, doing lubrication,
repairs or any other maintenance on the machine.
•
Ensure that the machine hydraulics are disconnected from
the power source.
•
Wear gloves when handling components with cutting
edges, such as any ground cutting components.
•
Beware of hazards created by springs under tension
or compression when dismantling or maintaining the
machine.
•
It is recommended that you clean the machine with a water
blaster or similar apparatus before commencing
maintenance.
Make Sure the Machine is Well Supported
When machinery is fitted with hydraulics, do not rely on the
hydraulics to support the machine. During maintenance or while
making adjustments under the machine, always lock the hydraulics
and support the machine securely. Place blocks or other stable
supports under elevated parts before working on these.
Electrical Maintenance
Disconnect the electrical supply from the tractor before doing any
electrical maintenance.
Welding
With electronic equipment in modern tractors it is advisable to disconnect
the machine from the tractor, or at least disconnect the alternator and
battery before attempting any welding.
Use Only Genuine Spare Parts
Unauthorised modifications or non-genuine spare parts may be
hazardous and impair the safe operation and working life of the machine.
Excess lubricants must be disposed of safely so as not to become a
hazard.
8