Aoni B217 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Cuffie Aoni B217. Aoni B217 6.

Power on and off

Auto Power ON/OFF

The earphones are turned on automatically when you take them out from the charging case.

A "Power On" message is heard, and the LEDs of the earphone ﬂash blue for second.

The earphone power off and are being charged automatically once the earphones are inserted

into the charging case.

Note

· Auto Power ON/OFF

in the charging case

· The earphone automatically power off if they do not find a paired Bluetooth device within 90

seconds or if they are connected via Bluetooth but no audio playback for approx. 3 minutes.

Manual Power ON

Touch and hold the right and left touch control panel for second, the voice prompt "power on" is

heard, the LEDs of the earphone flash blue for second.

Using the earphones

Pairing

When you use the earphones for the ﬁrst time, follow the procedure below to pair them.

1. The earphones are turned on automatically when you take them out

from the charging case.

Or turn the earphones on manually by touching and holding the right and left touch control

panel for second, the voice prompt "power on" is heard, and the LEDs of the earphone

flash blue for second.

2. The left and right earphone are paired automatically, a "Dong, dong"

signal tone is heard.

When the earphones start pairing with a Bluetooth® device, a "Pairing" message is heard,

the LEDs of earphone flash blue and red

when the left and right earphone are paired for the first time.

3. Activate Bluetooth® on your

Select "B217"from the list of found Bluetooth devices to complete pairing. If necessary,

enter the default pin code "0000". If pairing was successful, you hear the voice prompt

"Connected" and the LEDs of the earphones turn off.

will not work when the charging case is out of power.

The voice prompt "Pairing success" is heard

quickly.

device and search for "B217".

Bluetooth