Danfoss 088U0215 Istruzioni - Pagina 8

Sfoglia online o scarica il pdf Istruzioni per Termostato Danfoss 088U0215. Danfoss 088U0215 16. Cf-rf room thermostat with infrared floor sensor

Instruction

Floor surface temperature limitation

1. Ensure actual floor surface temperature is shown in

the display illustrated by

2. Press and hold the push button  until SET MAX is

also shown in the display.

3. Press the up/down selector  to set the maximum

floor surface temperature limitation.

4. Press the push button  shortly, SET MIN is also

shown in the display.

5. Press the up/down selector  to set the minimum

floor surface temperature limitation.

IMPORTANT!

As heat emission from the floor may vary slightly depending on

floor covering - and thereby cause inaccurate temperature

measurement - it may be necessary to adjust the setting of

max. and min. floor surface temperatures accordingly.

It is important always to follow recommendations from the

floor manufacturer regarding max. floor surface tempera-

ture.

It is recommended always to include mixing shunt for floor

heating circuits in order to ensure optimal flow tempera-

ture. - In addition to minimised energy consumption, correct

setting of the flow temperature will eliminate the risk of

excessive heat transfer to the floor.

Danfoss Heating Solutions

CF-RF Room Thermostat with Infrared Floor Sensor

VIUHR402