3T-Components 3T-MOTORS 3T35-R Manuale di installazione e istruzioni per l'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale di installazione e istruzioni per l'uso per Motore 3T-Components 3T-MOTORS 3T35-R. 3T-Components 3T-MOTORS 3T35-R 20. Radio shutter / awning motors with mechanical limit switches

Stampa la pagina

INSTALLATION INSTRUCTIONS

Slide the side bearing with universal bearing onto the support tube & fasten.

•

Ensure that the motor square spigot is properly engaged in the universal bearing.

•

Secure the motor square spigot with the supplied cotter pin.

•

Attach the cover to the side bearing.

•

Install awning & release fuses.

•

3.9

Support tube

Side bearing &

Universal bearing

Awning motor wiring:

Connect the radio awning motor to the mains.

•

The electrical connection of the awning motor and control may only be carried out by qualified personnel.

•

If the motor runs in the opposite direction after installation, the direction of rotation of the radio motor must be changed

•

via the radio transmitter (p. 16).

Power grid

230 V / 50 Hz

1) brown / black = L1 / Phase

2) blue = N Neutral conductor

3) green/yellow = PE Protective conductor

Programming radio transmitter

Teach radio transmitter to shutter motor. See Programming radio transmitter > Teaching hand-held transmitter to 3T radio motor type R (page 16).

•

If the direction of rotation is reversed, please change it with the taught-in radio handheld transmitter > Change direction of rotation of radio motor (page 16).

•

fig. 3.11

fig. 3.12

3.10

1 (L1)

2 (N)

3 (PE)

fig. 3.9

fig. 3.10

3.11

Cotter pin

3.12

Cover

Radio awning motor