Danfoss DEVIreg 532 Manuale di installazione - Pagina 6
Sfoglia online o scarica il pdf Manuale di installazione per Termostato Danfoss DEVIreg 532. Danfoss DEVIreg 532 16. Electronic thermostat
Stampa la pagina•
The thermostat must be connected to a power supply
via an all-pole disconnection switch.
•
The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
•
Always connect the thermostat to continuous power
supply.
•
Do not expose the thermostat to moisture, water,
dust, and excessive heat.
2
Mounting Instructions
Please observe the following placement guidelines:
6
Place the thermostat at a suitable height
on the wall (typically 80-170cm.).
In wet rooms, always place the thermostat
according to local regulation on IP classes.
Do not place the thermostat on the inner
side of an exterior wall.
DEVIreg™ 532
Installation Guide