Danfoss ECtemp 330 Manuale di installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione per Termostato Danfoss ECtemp 330. Danfoss ECtemp 330 12. Electronic thermostat
Anche per Danfoss ECtemp 330: Manuale di installazione (12 pagine), Manuale di installazione (12 pagine), Manuale di installazione (16 pagine)

ECtemp 330 (-10 to +10°C)

Protection class

Dimensions

Weight

The product complies with the EN/IEC Standard "Automatic

electrical controls for household and similar use":

•

EN/IEC 60730-1 (general)

•

EN/IEC 60730-2-9 (thermostat)

1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off

before installation.

Please also note the following:

•

The installation of the thermostat must be done by an

authorized and qualified installer according to local

regulations.

•

The thermostat must be connected to a power supply

via an all-pole disconnection switch.

•

The sensor is to be considered as live voltage. Have

this in mind if the sensor must be extended.

•

Always connect the thermostat to continuous power

supply.

•

Do not expose the thermostat to moisture, water,

dust, and excessive heat.

Installation Guide

Class II -

86 x 36 x 58mm

83g