Danfoss TP7000 Series Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Termostato Danfoss TP7000 Series. Danfoss TP7000 Series 11. Electronic programmable room thermostat
Anche per Danfoss TP7000 Series: Manuale di istruzioni per l'installazione (9 pagine), Istruzioni per l'installazione Istruzioni per l'utente (14 pagine)

What is a programmable room thermostat?

... an explanation for householders

A programmable room thermostat is both a programmer and a room

thermostat. A programmer allows you to set 'On' and 'Oﬀ ' time periods

to suit your own lifestyle. A room thermostat works by sensing the air

temperature, switching on the heating when the air temperature falls

below the thermostat setting, and switching it oﬀ once this set temperature

has been reached.

So, a programmable room thermostat lets you choose what times you want

the heating to be on, and what temperature it should reach while it is on.

It will allow you to select diﬀ erent temperatures in your home at diﬀ erent

times of the day (and days of the week) to meet your particular needs.

Turning a programmable room thermostat to a higher setting will not make

the room heat up any faster. How quickly the room heats up depends on the

design of the heating system, for example, the size of boiler and radiators.

Neither does the setting aﬀ ect how quickly the room cools down. Turning

a programmable room thermostat to a lower setting will result in the room

being controlled at a lower temperature, and saves energy.

The way to set and use your programmable room thermostat is to ﬁ nd the

lowest temperature settings that you are comfortable with at the diﬀ erent

times you have chosen, and then leave it alone to do its job. The best way to

do this is to set low temperatures ﬁ rst, say 18°C, and then turn them up by

one degree each day until you are comfortable with the temperatures. You

won't have to adjust the thermostat further. Any adjustments above these

settings will waste energy and cost you more money.

If your heating system is a boiler with radiators, there will usually be only one

programmable room thermostat to control the whole house. But you can

have diﬀ erent temperatures in individual rooms by installing thermostatic

radiator valves (TRVs) on individual radiators. If you don't have TRVs, you

should choose a temperature that is reasonable for the whole house. If you

do have TRVs, you can choose a slightly higher setting to make sure that

even the coldest room is comfortable, then prevent any overheating in

other rooms by adjusting the TRVs.

The time on the programmer must be correct. Some types have to be

adjusted in spring and autumn at the changes between Greenwich Mean

Time and British Summer Time.

You may be able to temporarily adjust the heating programme, for example,

'Override' , 'Advance' or 'Boost' . These are explained in the manufacturer's

instructions.

Programmable room thermostats need a free ﬂ ow of air to sense the

temperature, so they must not be covered by curtains or blocked by

furniture. Nearby electric ﬁ res, televisions, wall or table lamps may prevent

the thermostat from working properly.

Danfoss Heating