Airwell 24 Manuale operativo - Pagina 5

Sfoglia online o scarica il pdf Manuale operativo per Condizionatore d'aria Airwell 24. Airwell 24 11. Had/jad/dha wall mounted range dc inverter

Stampa la pagina
quickly. The indicator will light up for about 2
seconds and off, indicating the filter indicator
had been reset.
Temperature indicator
G
This indicator indicate the set point
temperature (SPT). During operation mode,
upon receiving any signal from Remote
Control (RC), the SPT will be displayed for
15 seconds before it goes off.
COOL indicator
H
The indicator will light up if the operation
mode is set to "COOL", "DRY" or "AUTO".
After around 15 seconds, the indicator will
be deemed. Upon receiving any signal
from Remote Controller (RC), the light will
come up strong and deemed after about 15
seconds.
I HEAT indicator
The indicator will light up if the operation
mode is set to "HEAT". After around 15
seconds, the icon will be deemed. Upon
receiving any signal from Remote Controller
(RC), the light will come up strong and
deemed after about 15 seconds.
J Fan Speed indicator
The indoor fan speed set by user will be
indicated as below:
a) Low
b) Medium
c) High
d) Strong
e) Auto
Infra-Red (IR) receiver
K
Receive signal from the Remote Controller(RC).
MODE/RESET Button
L
This is a multi-function button.
RESET Button
M
When Filter indicator is on, press to turn off
the filter indicator and reset the filter counter.
When Filter indicator is off, press to cancel
the buzzer announcer.

MODE BUTTON

N
This button can be turned on for cooling
or heating, or turned off without remote
controller. every short pressing, the next
operation mode is selected, in this order:Cool
Mode→Heat Mode→standby→. If button is
pressed long, the system enters diagnostic
mode.
Cooling indicator
O
Lights up only when MODE Button(N) is
pressed in cooling status.
Heating indicator
P
Lights up only when MODE Button(N) is
pressed in heating status.
Mode Function:
As long as the filter indicator is off, this button
functions as MODE Button. This button
can be turned on for cooling or heating,
or turn off without remote controller. Every
short pressing, the next operation mode is
selected, in this order: Cool Mode → Heat
Mode → Standby → .
If buttom is pressed long, the system enters
diagnostic mode.
Reset Function:
When Filter indicator is on, the button
functions as RESET Button. Short pressing
and release quickly, turns off the filter
indicator and reset the filter counter.