3UVIEW TB2 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Automobile Accessories 3UVIEW TB2. 3UVIEW TB2 15. Vst taxi roof led display

Safety Information

Warning:

Before using the apparatus, please must read, understand and comply with all the

safety information, warning and etc.

Only qualiﬁed mechanics are allowed to install the apparatus according to the hereby

product manual. Do not connect the apparatus to alternating current. Input current is

DC8~DC18. The positive and negative poles of the main power line must be connected

to the positive and negative poles of the car battery, and the control line must be

connected to the ACC position of the fuse box or the ignition switch (professionals can

also modify other methods). After installation, make sure wire connection is right and

fasten the wire connection. Do not step on power or data cables, and especially avoid

pinching plugs, power sockets, and power/data cable. Damaged power and data cables

should be replaced immediately. Only use accessories and accessories speciﬁed by

our company. If the product is not stored for a long time, please keep the product in a

dry environment and test it with electricity every 3 months. Please train the driver on the

basic working principle of the product, so as to know the basic problem point when there

is an abnormality.This product should be installed and serviced by qualiﬁed service

technicians.When this product is damaged in any events (such as a damaged power

cord or plug, the device does not work properly, or the device has been dropped),

please contact a professional mechanics to ﬁx. This product may only be used in

conjunction with systems or peripherals speciﬁed by the manufacturer or included with

the device. Be careful when lifting, moving or transporting this product to avoid product

tip-over damage and personal injury.

This product may cause injury due to short circuit, smoke and falling due to improper

operation. When installing this product or wiring, please make sure that the vehicle is

turned oﬀ to avoid damage to the vehicle. Please do not connect the input power

terminal of this product to AC power. Please carefully check the power cord, power cord

connectors, and wiring terminals for any problems before powering on the product.Do

not use any damaged or exposed power cord or power plug. To reduce product

abnormalities, do not disassemble the product.

Do not use this product if the ambient temperature outside the vehicle exceeds 80°C.As

this product may generate heat, keep ﬂammable and explosive materials away from this

product. In order to avoid ﬁre due to overloading of the power cable, please follow the

instructions for use of this product or the Make sure that the installed cable is properly

loaded and do not replace the power cord at will.