Danfoss APP 0.6 Manuale di servizio - Pagina 6

Sfoglia online o scarica il pdf Manuale di servizio per Pompa dell'acqua Danfoss APP 0.6. Danfoss APP 0.6 12. Disassembling and assembling
Anche per Danfoss APP 0.6: Manuale di istruzioni (8 pagine)

Stampa la pagina

Disassembling and Assembling, APP 0.6-1.0

Service guide |

2. Removal of flushing valve

6 | 180R9092 | DKCFN.PI.013.EC5.02 | 521B0739

19. Lubricate the threads on the 4 screws with

grease and screw them into the pump and

tighten by hand. Use Molykote D paste

from DOW Corning or Klüber UH1 84-201

from Klüber lubrication.

Tighten screws according to exploded

view.

1.. Use a pointed plier to remove flushing

valve. Gently grab the pin with the plier

and pull it out.

3. To assemble the valve, press new spring

onto shoulders of poppet guide and

poppet so it is stuck on both shoulders.

Then mount the new O-ring on poppet

guide.

2. Assemble the new flushing valve, or

replace parts that are worn (shoulders)

4. Turnflushing valve upside down. If it is not

properly assembled spring will fall off.