Danfoss APP 5.1 Manuale di servizio - Pagina 6

Sfoglia online o scarica il pdf Manuale di servizio per Pompa dell'acqua Danfoss APP 5.1. Danfoss APP 5.1 12. Disassembling and assembling
Anche per Danfoss APP 5.1: Istruzioni (10 pagine)

Stampa la pagina

Service guide | Disassembling and Assembling, APP(W) 5.1-10.2

3. Disassembling swash

plate

8. Position the guide pin in the housing.

10. Screw the 8 screws into the flange and the

housing.

Turn each screw 2 rounds at a time to

ensure the flange is mounted as straight as

possible Tighten the screws to a torque of

30 ±3 Nm.

To prevent seizing-up, lubricate

the threads on the 8 screws with grease,

screw them into the pump and tighten by

hand. Use Molykote® D paste from Dow

Corning or Klüber UH1 84-201 from Klüber

lubrication.

1. Unscrew the screw in the mounting flange.

Guide pin

9. Position and carefully press, by hand, the

combined flange and swash plate into the

housing.

IMPORTANT: Ensure not to cut the O-ring.

11. Mount the seal retainer ring Tighten the

ring with a torque of 60 ± 5 Nm.

2. Turn the mounting flange upside down.

180R9238 | DKCFN.PI.078.F3.02 | 521B1196 | 6