Dunlop CARBON COPY MXR Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Pedale musicale Dunlop CARBON COPY MXR. Dunlop CARBON COPY MXR 2. Analog delay

Stampa la pagina
Dunlop CARBON COPY MXR Manuale
M169 CARBON COPY
ANALOG DELAY
®
POWER
DESCRIPTION
The Carbon Copy Analog Delay
• 100% analog bucket-
is powered by one 9-volt battery
brigade technology
(remove bottom plate to install),
• Up to 600ms of delay with
a 9-volt AC Adapter such as the
switchable modulation
Dunlop ECB003/ECB003EU, or
• Internally adjustable
the DC Brick
modulation circuit
power supplies.
• True bypass
CONTROLS
MOD switch toggles modulation
on/off (blue LED indicates on)
MIX knob controls blend of
wet and dry signals
REGEN knob sets number
of repeats
DELAY knob sets delay time
FOOTSWITCH toggles
effect on/bypass (blue LED
indicates on)
DIRECTIONS
• Run a cable from your guitar
to the M169's INPUT jack and
another cable from the M169's
OUTPUT jack to your amplifier.
• Start with all controls at
and Iso-Brick
™
™
12 o'clock.
• Turn the effect on by depressing
the footswitch.
• Rotate the REGEN knob clock-
wise to increase the number of
repeats or counterclockwise to
decrease it.
• Rotate the MIX knob clockwise
to increase the ratio of wet to dry
signal or counterclockwise to de-
crease it. Fully clockwise results
SAMPLE SETTINGS
MEMPHIS SLAP
in half wet/half dry mix while fully
counterclockwise results in
100% dry signal.
• Rotate the DELAY knob clockwise
to increase delay time or counter-
clockwise to decrease it.
• Push in the MOD switch to add
modulation to your delay signal.
Modulation width and speed
can be adjusted internally
(remove bottom plate) with
a 3mm slotted screwdriver
(see Diagram A).
DIAGRAM A
GOLDEN AGE
SKANK'N DUB
GUITAR GOD
SPECIFICATIONS
Input Impedance
1 MΩ
Output Impedance
1 kΩ
Max Input Level
+5 dBV,
500 Hz
Max Output Level
+8 dBV
Noise Floor*
Mix at Max CW
-96 dBV
Mix at Max CCW
-104 dBV
Delay Distortion
<1%, 1 kHz,
-5 dBV Input
Delay Time
20 ms to
600 ms
Noise Reduction
2:1 ratio
Modulation Speed
0.2 Hz to
2.2 Hz
Bypass
True Hardwire
Current Draw
26 mA
Power Supply
9 volts DC
*Regen at max CCW, A-weighted
P.O. BOX 846, BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
DUNLOP MANUFACTURING, INC.