Dunlop L.312.C.M Manuale di installazione - Pagina 10

Sfoglia online o scarica il pdf Manuale di installazione per Automobile Accessories Dunlop L.312.C.M. Dunlop L.312.C.M 18. Auxiliary air suspension

Mercedes-Benz Sprinter 200/300

5.3 Fitting of the Air Bellow



DUNLOP and the Flying D Device are trademarks of Dunlop International Group and are used under license by DSC Nederland B.V.

L.312.C.M

Connect the air tube to the bellow, noting

colour designation : Black tube to left-hand

spring, Blue tube to right-hand spring.

Simply push-in the tube as far as it will

travel and release (see Section 5.4). Feed

the other end of the tube through the large

hole in the upper bracket.



ii. Unscrew and disconnect the load sensing

valve (LSV) linkage

arm .

Unscrew the arm from the axle

bracket and remove it.

iii. Position the bellow between the chassis and

the axle, and attach the bottom plate of the

bellow to the lower bracket using two bolts

and two flat washers. Do not fully tighten

at this stage because the bellow may

require

alignment

Section 5.7).

Volkswagen Crafter 28-35

from the existing



once

inflated

www.dunlopsystems.nl

(see