Dunster House ADAM II H4-1824ASH Manuale di installazione - Pagina 10

Sfoglia online o scarica il pdf Manuale di installazione per Case da giardino Dunster House ADAM II H4-1824ASH. Dunster House ADAM II H4-1824ASH 15.

STEP 6: PURLINS

Items:

ST-PT35702230 (Purlin)

12x 70mm SCREW

Principle of purlins

installation

Side purlins

Middle purlin

STEP 7: ROOF BOARDS

Items:

MFP - 2440x970x10

36x 35mm SCREW

Principle of floor boards installation

Use 35mm screws. Keep equal distance between screws. Make

sure that each screw is fixed into timber underneath the board.

Front view to inside

(Front panel have been removed for illustration

purposes only.)

35mm SCREW

MFP board

Assembly Steps

Pre-drill parts before fixing with screws

6a) Position the middle purlin as shown in the diagram and secure it by using 4x 70mm

screws (2x 70mm screws on each end of purlin).

6b) Position the remaining purlins in between the center purlin and the side walls. Use 2x

70mm screws per each purlin and secure them on the top and bottom. See image below

(1.0).

Flush

70mm SCREW

SIDE

7a) Position MFP onto the roof and ensure the overhang is equal for the front and rear.

7b) Secure the MFP to the purlins by using equally spaced 35mm screws. Use 18

screws per MFP board.

MFP board

Side view - Middle purlin connection

(1.0)

(Some components have been removed

for illustration purposes only.)

Middle purlin

Window

Pre-drill parts before fixing with screws

35mm SCREW

FRONT

70mm SCREW

MFP boards

Page 10