Casio E-Con EA-200 Riferimento tecnico - Pagina 4

Sfoglia online o scarica il pdf Riferimento tecnico per Calcolatrice Casio E-Con EA-200. Casio E-Con EA-200 20. Casio ea-200 calculator-tools: user guide
Anche per Casio E-Con EA-200: Catalogo dei prodotti (16 pagine)

Stampa la pagina
Casio E-Con EA-200 Riferimento tecnico
3. Data Send Priority
1. Real-time Type
(Selected using Command 12)
Channel Priority: CH1, CH2, CH3, SONIC, DIG IN, sampling time
• Variable (1 data)
Sends the data of the channel with highest priority among {CH1, CH2, CH3,
SONIC, DIG IN, sampling time}.
The data with the second highest and subsequent priorities is not sent.
• List (N line data)
{CH1 data n, CH2 data n, CH3 data n, SONIC data n, DIG IN data n, sampling
time n}
(n: number of samples at the point that request is made)
2. Non Real-time Type
(Selected using Command 12)
Channel Priority: Sampling time, mic, CH1, CH2, CH3, SONIC, DIG IN
• Variable (1 data)
First sends the oldest data on the highest priority channel.
Next sends the next oldest data upon request.
Next channel data is sent after all the data of the current channel is sent.
• When List type data is requested part way through
The channel's data is sent as a list.
• When Matrix type data is requested part way through
Sent as Matrix type.
• List (N line data)
Sends the data of the highest priority channel.
{CH* data1, CH* data2, CH* data3, ... CH* data n}
Next sends the next highest priority channel's data upon request.
* Sample data that is not configured is omitted.
* After everything is sent, returns to the beginning when a data request comes
in.

Pulse Sampling

Channel Name: SONIC
(Pulse period sampling is also supported on CH1.)
1. SONIC Connector Specifications
Pin Number
Pulse Period
1
2
3
4
5
6
2. Types of Sampling
1 Pulse Period Sampling
Channel
Supported Sampling Input Voltage
Trigger Level (V)
Range
Resolution
Input Impedance
Rising/Falling switchable (4 methods: A to D)
1 or 6pin
A
B
C
D
When using the EA-2
• Use the bundled AC adaptor.
• Minimum sampling interval is 0.02 sec.
(When the subject is 3 meters or less away.)
– 4 –
Pulse Interval
Vin
10V
Sampling end pulse
Not used
Sampling output pulse
Auto-ID
Auto-ID
+5.3V DC
+5.3V DC
GND
GND
Vin-low 0–5V
Not used
CH1, SONIC
10V (1pin), 0–5V (6pin)
Pin 1:
10V 12-bit D/A
(Resolution: 4.9mV)
Pin 6: 0 to 5V 12-bit D/A
(Resolution: 1.2mV)
0 to 600 sec (4 Sampling Intervals: A to D)
0.868 µ sec
1MΩ