Free The Tone ARC-4 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di registrazione Free The Tone ARC-4. Free The Tone ARC-4 16. Audio routing controller
Anche per Free The Tone ARC-4: Procedure di aggiornamento del firmware (18 pagine)

Stampa la pagina
Free The Tone ARC-4 Manuale d'uso
Deleting Banks (BK-DL): ON/OFF switch 4
BK-DL
ENTER
 Turn the PARAMETER encoder or press the UP/DOWN switch to select the bank to be deleted.
Parameter: BNK001 to BNK200 (default = BNK001)
Switching Preset Contents (PS-SW): ON/OFF switch 5
PS-SW
001-01
ENTER
PARAMETER
UP/DOWN
 Turn the PARAMETER encoder or press the UP/DOWN switch to select the source preset.
 Turn the PARAMETER encoder or press the UP/DOWN switch to select the destination preset.
Parameter: 001-01 to 200-10 (default = 001-01)
Switching Bank Contents (BK-SW): ON/OFF switch 6
BK-SW
BNK001
ENTER
PARAMETER
UP/DOWN
 Turn the PARAMETER encoder or press the UP/DOWN switch to select the source bank.
 Turn the PARAMETER encoder or press the UP/DOWN switch to select the destination bank.
Parameter: BNK001 to BNK200 (default = BNK001)
TITLE: PS2/L2 switch
Names for presets, banks, etc. are set in these configuration modes.
N.B. Pressing the UP/DOWN switch when entering lables changes character types to be entered.
Setting Preset Titles (PS-TT): ON/OFF switch 1
PS-TT
001-01
ENTER
PARAMETER
UP/DOWN
 Turn the PARAMETER encoder or press the UP/DOWN switch to select the desired preset.
 Press the ENTER switch. The Display-2 shows the Title Edit screen. Use the PARAMETER encoder and the UP/DOWN switch to enter characters.
Parameter: Uppercase and lowercase letters, numerals, symbols
NOTE
Press the LEFT/RIGHT switch to enter the next character or correct the previous character. Press the ON/OFF 7 switch to enter a space, and press the ON/OFF 8 switch to delete a
character.
The entered title is shown in the Display-1 when the preset is recalled.
Setting Duration in which Recalled Preset Title is Being Shown  p.15
14
DONE
BNK001
PARAMETER
ENTER
UP/DOWN
 AND
DONE
ENTER
PARAMETER
ENTER
UP/DOWN
DONE
 AND
ENTER
PARAMETER
ENTER
UP/DOWN
 Display-2
PS-TT
ENTER
PARAMETER
ENTER
UP/DOWN
Setting Bank Titles (BK-TT): ON/OFF switch 2
BK-TT
BNK001
ENTER
PARAMETER
UP/DOWN
 Turn the PARAMETER encoder or press the UP/DOWN switch to select the preset whose name should be set.
 Press the ENTER switch. The Display-2 shows the Title Edit screen. Use the PARAMETER encoder and the UP/DOWN switch to enter characters.
Parameter: Uppercase and lowercase letters, numerals, symbols
NOTE
Press the LEFT/RIGHT switch to enter the next character or correct the previous character. Press the ON/OFF 7 switch to enter a space, and press the ON/OFF 8 switch to delete a
character.
The entered title is shown in the Display-2 when the preset is recalled.
Setting MIDI Channel Name (MD-TT): ON/OFF switch 3
MD-TT
CH01
ENTER
PARAMETER
UP/DOWN
 Turn the PARAMETER encoder or press the UP/DOWN switch to select the MIDI channel whose name should be set.
 Press the ENTER switch. The Display-2 shows the Title Edit screen. Use the PARAMETER encoder and the UP/DOWN switch to enter characters.
Parameter: Uppercase and lowercase letters, numerals, symbols
NOTE
Press the LEFT/RIGHT switch to enter the next character or correct the previous character. Press the ON/OFF 7 switch to enter a space, and press the ON/OFF 8 switch to delete a
character.
The entered title is shown in the Display-2 when the setting screen for MIDI program or control change number is displayed. Since MIDI channels can be managed via names of the
connected device, etc., this function is very usuful when controlling multiple MIDI devices.
Setting Duration in which Recalled Preset Title is Being Shown (TT-DP): ON/OFF switch 4
TT-DP
ENTER
 Turn the PARAMETER encoder to set the desired time (duration).
Parameter 1: OFF, ON-05s, ON-1s, ON-2s, ON-3s (default = ON-1s)
NOTE
Display of Parameters: ON-0.5s = 0.5 seconds, ON-1s = 1 second, ON-2s = 2 seconds, ON-3s = 3 second, OFF = not shown
 Display-2
BK-TT
ENTER
PARAMETER
ENTER
UP/DOWN
 Display-2
MD-TT
ENTER
PARAMETER
ENTER
UP/DOWN
TT-DP
ON-1s
ENTER
PARAMETER
UP/DOWN
15