Abus TVHD50000 Istruzioni per l'uso originali - Pagina 3

Sfoglia online o scarica il pdf Istruzioni per l'uso originali per Telecamera di sicurezza Abus TVHD50000. Abus TVHD50000 16. Day & night hd-sdi 1080p standard camera

Stampa la pagina

Important Safety Information

All guarantee claims are invalid in the event of damage caused by non-compliance with

these operating instructions. We cannot be held liable for resulting damages.

In the event of material or personal damage caused by improper operation or non-

compliance with the safety notes, we cannot be held liable. All guarantee claims are

invalid in such cases.

Dear customer,

The following safety information and hazard notes are not only intended to protect your health, but

also to protect the device from damage. Please read the following points carefully:

There are no components inside the product that require servicing by the operator. Opening or

dismantling the product invalidates the CE certification and guarantee claims / warranty.

The product can be damaged if it is dropped, even from a low height.

Avoid the following adverse conditions during operation:

Moisture or excess humidity

Extreme heat or cold

Direct sunlight

Dust or flammable gases, vapors, or solvents

Strong vibrations

Strong magnetic fields (e.g. next to machines or loudspeakers)

The camera must not be directed toward the sun when the aperture is open.

This can destroy the sensor.

The camera must not be installed on unstable surfaces

General safety information:

Do not leave packaging material lying around. Plastic bags, sheeting, polystyrene packaging, etc.,

can pose a danger to children if played with.

The surveillance camera contains small parts which could be swallowed, and should be kept out of

reach of children for safety reasons.

Do not insert any objects into the device through the openings.

Only use replacement devices and accessories that are approved by the manufacturer. Do not

connect any non-compatible products.

Please pay attention to the safety information and operating instructions for the other connected

devices.

Check the device for damage before commissioning. Do not put the device into operation if you detect

any damage.

Adhere to the operating voltage limits specified in the technical data. Higher voltages could destroy

the device and pose a health risk (electric shock).

When installing the device in an existing video surveillance system, ensure that all devices are

disconnected from the mains power supply and low-voltage circuit.

If in doubt, have a specialist technician carry out assembly, installation and connection of the

device. Improper or unprofessional work on the power supply system or domestic installation

puts both you and other persons at risk.

Connect the installations so that the power supply circuit and low-voltage circuit always run

separately from each other. They should not be connected at any point or be able to become

connected as a result of a malfunction.