Dupline GAP 1605 Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Ricetrasmettitore Dupline GAP 1605. Dupline GAP 1605 5. Portable programming unit

Stampa la pagina

GAP 1605

Mode of Operation

The GAP 1605 is a portable

programming unit used for

reading

programming

channel code(s) in the series

of Dupline

products.

The external switch turns

the power on/off.

When the battery is installed

and the power is on, the

GAP 1605 is ready for use.

Connect the cable between

the programming unit and a

Dupline

module type G..

5 keys provide the means of

operating the GAP 1605:

two keys are used for read-

ing and programming, two

keys for changing Groups

and Channels and one key

for selecting the desired

Input/Output.

The current coding is dis-

played by 4 x 8 LEDs. The

top row of LEDs displays the

selected input or output.

The two middle rows display

the current channel group,

while the bottom row dis-

plays the current channel

code.

« In/Out » - Key

This key is used to scroll

through the I/O's of a mod-

ule. If a new module is con-

nected or if consecutive

channel codes are allocated

to the I/O's, pressing the

« In/Out » key has no effect

since all Dupline

modules

are preprogrammed to their

physical number of inputs/

outputs. This key is also

used to switch between

consecutive and individual

coding of the I/O's. To

change the mode, keep

« In/Out » pressed for more

than 2 seconds.

« Group » - Key

Used to select the Group

address within the range A

to P. The Group LED will

shift one position right for

each key activation.

« Channel » - Key

Used to select the chan-

nel(s) within the group. The

Channel LED will shift right

one, two or four positions,

depending on the number of

inputs/outputs. If consecu-

tive channels are selected,

then pressing the « Channel »

key will have no effect.

« Read / On » - Key

Used to turn on the GAP

1605 and to read the chan-

nel codes of the connected

module. When the reading is

completed, the display will

show the channel code of

the module: either 1, 2, 4 or

8 inputs/outputs.

2, 4 or 8 In/Out LED's being

ON indicates that consecu-

tive channel codes are allo-

cated to the I/O's, e.g. input

1 coded to P1, input 2 to P2

... input 8 to P8.

If only one In/Out LED is

ON, then the I/O's are cod-

ed individually, e.g. input 1

to C5, input 2 to D4 etc. The

code for each I/O is indicat-

ed by a group LED and a

channel LED.

If the GAP 1605 is not con-

nected to a Dupline

system,

it will turn off within two se-

conds.

Specifications are subject to change without notice (04.03.2009)

Dupline

« Prog » - Key

When the displayed I/O-

coding corresponds to the

desired channel configura-

tion, the codes will be

downloaded to the Dupline

module when pressing the

« Prog » key.

After programming is exe-

cuted, a verification takes

place. If this verification

fails, all activated LEDs in

the display will flash two

times, and the programming

unit will switch off.

If such behaviour occurs re-

peatedly on the same mod-

ule, the module may be

faulty. If several modules fail

to download, the GAP 1605

may be faulty.

Individual In/Out channel

programming

The GAP 1605 features an

additional mode of single-

channel

editing.

Pressing

« In/Out » for more than 2

seconds will change the

operating mode to single-

point

programming.

« In/Out » key is now used

to select one of the eight

possible inputs/output, thus

making individual channel

coding possible. The In/Out-

LEDs assign the display

channel code to the corre-

sponding physical input/out-

put of the module.

In singlemode the « Chan-

nel » key also has the ability

to disable an In/Out-position.

« Channel » must simply be

pressed past channel 8,

whereby both the Channel

LED and the Group LED will

turn off. To reenable, just

press « Channel » again.

is a registered trademark. A product of the CARLO GAVAZZI Group

Du line

Fieldbus

Installationbus

It is possible to change all

eight Inputs/Outputs, even

though some Dupline mod-

ules are built for only 1, 2 or

4 Inputs/Outputs.

To exit single channel pro-

gramming, just keep the

« In/Out » key pressed for 2

seconds.

Output status setting

On receivers it is possible to

configure the status of the

outputs during Dupline

ure. Normally, any output of

a receiver will go off during

Dupline failure. In some cas-

es the inverted function is

desirable (e.g. light applica-

tions - turn on light if the

Dupline

is down).

To change output status, the

GAP 1605 must be put into

configuration mode. This is

done as follows:

• Remove any connected

Dupline

system.

• Keep both « In/Out » and

« Group » pressed, while

pressing « Read/On ».

The

The first In/Out LED now

turns on. Connect the Dupline

system, and press « Read/

On ». If output status is set,

then channel LED 1 will illu-

minate. Pressing « Channel »

will toggle the output status

On/Off.

Press « Prog » to store.

If « Read/On » is pressed

when no Dupline

connected, the LEDs will

flash to indicated a false

condition. Only a successful

reading will reset this condi-

tion.

fail-

system is