Acer XD1250D series Manuale - Pagina 36

Sfoglia online o scarica il pdf Manuale per Proiettore Acer XD1250D series. Acer XD1250D series 45. Acer projector user's guide

Appendices

English ...

If you experience trouble with the projector, refer to the

following information. If the problem persists, please

contact your local reseller or service center.

Problem: No image appears on screen.

Ensure all the cables and power connections are correctly and se-



curely connected as described in the "Installation" section.

Ensure the pins of connectors are not crooked or broken.



Check if the projection lamp has been securely installed. Please



refer to the "Replacing the lamp" section.

Make sure you have removed the lens cap and the projector is



switched on.

Ensure that the "Hide" feature is not enabled.



Problem: Partial, scrolling or incorrectly displayed image.

Press the "Resync" button on the Remote Control.



If you use a PC:



If the resolution of your computer is higher than 1024 x 768 (XD1250,

XD1250D)/800 x 600 (XD1150, XD1150D). Follow the steps outlined

below to reset the resolution.

For Windows 3.x:

1. In the Windows Program Manager, click the "Windows Setup"

icon in the Main group.

2. Verify that your display resolution setting is less than or equal to

1024 x 768 (XD1250, XD1250D)/800 x 600 (XD1150, XD1150D).

For Windows 95, 98, 2000, XP:

1. Open "My Computer" icon, the "Control Panel" folder, and then

double click on the "Display" icon.

2. Select the "Setting" tab.

3. In the "Desktop Area" you will ﬁ nd the resolution setting. Verify

that the resolution setting is less than or equal to 1024 x 768

(XD1250, XD1250D)/800 x 600 (XD1150, XD1150D) resolution.

If the projector is still not projecting the whole image, you will

also need to change the monitor display you are using. Refer to

the following steps.

4. Follow the above steps 1-2. Click on the "Advanced Properties"

button.

5. Select the "Change" button under the "Monitor" tab .