Freedom ELECTRONICS Ovation 2 FE-24 Manuale di installazione - Pagina 7
Sfoglia online o scarica il pdf Manuale di installazione per Stampante Freedom ELECTRONICS Ovation 2 FE-24. Freedom ELECTRONICS Ovation 2 FE-24 10.
![Freedom ELECTRONICS Ovation 2 FE-24 Manuale di installazione](/uploads/products/server2/1691852/1691852.jpg)
FE-24 Printer
17. Plug the FC00009 and FC00010
printer cables into the FE-24 PCB.
18. DW-14: Using the existing printer data
cable, plug the disconnected end into the
FE-24 PCB. The other end should
still be connected to the SPM.
Zebra: Using the provided FC00004
cable, plug one end to the FE-24 PCB
and the other end into the SPM.
The USB data cable will no longer be
used.
19. Plug one end of the FC00005 power
cable to the FE-24 PCB and the
other end to the Wayne dispenser
distribution board. Remove the
existing printer power cable.
20. Secure all cables cleanly inside the
dispenser using zip ties and existing
cable clips. Allow enough slack that
the cables will not hang up when the
printer door is opened.
Slide the printer door open and closed
to make sure that there are no
obstructions. If there are, make
necessary adjustments.
21. Power the dispenser back on.
Freedom Electronics: FE-24 Install
FC00010
cable
FC00005
cable
FC00009
cable
FC00004
cable
7