Dangerous Music Convert-2 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di registrazione Dangerous Music Convert-2. Dangerous Music Convert-2 14.

| DANGEROUS MUSIC

sources.

External: Selecting this button will make the Convert-2 slave to an external word clock source. For example, if utilizing

a master studio clock, this would distribute WC to the Convert-2.

Master: Depress the button for 5 seconds. The LED will blink. Now the Convert-2 is the master studio clock and other

digital sources will slave to it. Audition the difference.

Note:

When in Master clock mode, the sample rate must be manually selected and the destination devices must be set to the

identical sample rate (i.e. all units at 192kHz).

Tip:

Try utilizing the Convert-2 as the master clock. Our high profile beta testers found it "remarkably revealing & detailed"

and "...this is the best sounding clock auditioned to date- and we've tried everything. "

Footnote: The Convert-2 leverages JetPLL*, widely regarded as one of the lowest jitter clock designs in the world. As expected,

Dangerous diverges from other manufacturers through a custom implementation of the JetPLL that exceeds its design

specification for jitter performance.

7. BYPASSABLE VOLUME CONTROL (OUTPUT TRIM)

[OUTPUT TRIM SECTION PICTURED ABOVE]

Feature: Custom Potentiometer.

Benefit: This custom pot provides two options.

1. Use it as a volume knob, with the Analog Outputs connected directly to a pair of studio monitors.

2. Turned fully clockwise, a small detent will be detected, triggering a relay, thus removing the pot entirely from the

signal path and allowing the user to utilize a separate, dedicated monitor controller (i.e. Dangerous Monitor ST).

Convert-2: Rear Panel Connections

8. ANALOG OUTPUT

[REAR PANEL ANALOG OUTPUTS PICTURED ABOVE]