Freedom Innovations Kinnex 2.0 Manuale di istruzioni per l'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Apparecchiature mediche Freedom Innovations Kinnex 2.0. Freedom Innovations Kinnex 2.0 11. Prosthetist
Anche per Freedom Innovations Kinnex 2.0: Manuale d'uso del paziente (2 pagine), Manuale di configurazione (2 pagine), Manuale di riferimento (2 pagine)
Stampa la pagina
Basic Operations
Manual Adjustments
To manually adjust Kinnex, utilize the three buttons on the front
of Kinnex. The buttons are used to control and interact with
Kinnex when a mobile device is not available or desired.
Button Symbols and Functions
Battery Function
Charging Battery
To charge the battery:
•
- Remove the rubber plug from the port at the top front
of the ankle
- Connect to wall power supply provided with Kinnex.
The green battery indicator light at the front of
•
the ankle will begin to flash indicating that the
ankle is charging. After a short period of time,
the indicator light will turn off but charging will
continue. While charging, the indicator light can
be turned back on by pressing and releasing the
battery button on the front of the ankle. The
duration of the flash indicates the amount of
charge in the battery. The longer the flash, the
closer the battery is to being charged.
- Once the ankle is completely charged, the indicator
light will be solid green when the button is pressed
and released.
A full charge requires three hours or less using
•
the wall power supply.
CAUTION:
Use only the wall power supply provided with
Kinnex for battery charging.
8
Battery / Power Status Button
•
Change Footwear Button
•
Bluetooth Button
•
Freedom Innovations |
Battery Charge Level
To manually check the charge level of Kinnex when
•
unplugged (not charging) using the button located on the
front of the ankle:
- Press and release the Battery Button on the front of
the ankle.
- Indicator lights will illuminate briefly giving the charge
level as shown in table below:
Indicator Light
Charge Level
Solid green
51% - 100%
Flashing green
21% - 50%
Solid red
11% - 20%
Flashing red
1% - 10%
To manually check the charge level of Kinnex while
•
charging (plugged in):
- Press and release the Battery Button on the front of
the ankle.
- The green indicator light will flash briefly. The longer
the flash, the closer the battery is to being charged.
A solid light indicates the battery is fully charged.
Battery Low Indicators
Low battery notifications: When the battery charge
•
level is at or below 20%, the ankle will periodically
vibrate. While walking, the vibration feels like a grinding
sensation as you take a step. While not walking, the
vibration feels like a subtle buzzing. These notifications
can be dismissed by quickly pressing and releasing the
Battery Button on the front of the ankle, or by using the
mobile app.
20% charge indicator: When the battery charge level
•
falls to 20%, the ankle will notify every 15 seconds until
dismissed. No indicator lights will flash.
10% charge indicator: When the battery charge level
•
falls to 10%, the indicator light at the front of the ankle
will flash red, and the ankle will notify every 5 seconds
until dismissed.
2% charge indicator: When the battery charge level
•
falls to 2%, the indicator light at the front of the ankle
will flash red, and the ankle will notify every 2 seconds.
Notifications cannot be dismissed when the battery
charge is 2% or lower.
0% charge indicator: When the battery charge level
•
falls to 0%, the ankle will power off and go into a low
stiffness mode.
Kinnex 2.0
| Instructions for Use
9