Dangerous Music SR Manuale di configurazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di configurazione per Router di rete Dangerous Music SR. Dangerous Music SR 4.

Once operational, the system will initially operate as a standard ST/SR arrangement capable of

5.1. The additional channels are activated from within the setup function. When setup is entered, select

the additional channels you require by pressing the associated mute button. For 7.1, press the L Rear

and R Rear buttons, lighting their LEDs.

Once setup is exited, the mute control of the additional channels above 5.1 are accessed by

pressing the PPI (Mute Shift) button. With the mute shift LED dim, the standard 5.1 channels are

accessed by the mute buttons as normal. With the Mute Shift indicator bright-up, the mute section focus

is shifted and the additional Left and Right Back channels are accessed by the mute buttons. Shifting

the mutes makes no changes to the image; it merely shifts the mute group focus and indications of the

muted channels. Because of this, the all-important true PPI functionality is still available if needed.

The Solo function is seamless between the 2 mute groups. If the Solo function is activated and

say, the Left Front speaker is soloed, all other outputs including those above 5.1 are muted. Shifting the

mute focus to the channels above 5.1 will indicate the muted state of those channels.

FABULOUS AUTO MONO

This function provides the ability to have a speaker selection programmed with the Mono

function engaged. You activate this feature from within the setup routine. Enter setup, make the speaker

selection that you would like to have a default mono setting and press the mono switch that will then

indicate mono, and the activated mono function can be heard. When setup is exited, every time that

speaker system is selected, the mono function will be automatically engaged by default. The mono

setting can be toggled manually with the Mono button. If the mono function is manually engaged,

changing speaker selections will not shut the mono function off. If the mono function is not manually

engaged, the mono function will follow the user defined defaults. From an initial state, all speakers are

stereo by default. Please note that the Mono Summing Feature only works on Stereo sources. It is not a

surround mix down feature. There are so many ways to mix down surround sources that this function

must be left up to software in the user's DAW or editor.