Danguard HS-400 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di sicurezza Danguard HS-400. Danguard HS-400 17.

5. Main Menu

System Upgrade

Press the p or q button to select the menu item SYSTEM UPGRADE. In this menu, you can

update the firmware of the monitor, or the cameras.

1. Copy the firmware to an SD card or a USB stick and plug it into the monitor.

2. Select „Upgrade Firmware local" with the p or q key and confirm with OK. Now press to start

the update process button

(record button). A popup message appears. Press OK to confirm

or MENU to cancel.

Press the p or q button to select the menu item SCAN MODE PERIODE. In this menu you can

set the interval of the video. If you have for example connected four cameras and set the monitor

to single-image display, change the camera images automatically after a certain time. You can

have an interval of 5, 10, set 15, 20 or 30 seconds.

Press the p or q button to select the menu item MUTE. In this menu you can turn on or off the

volume of the monitor.

Press the p or q button to select the menu item LOAD DEFAULT. In this menu, the monitor can

be reset to the default setting. All the settings you have made are lost. Confirm the operation by

clicking OK, or select „Cancel" to leave the menu.

Press the p or q button to select the menu item „BRIGHTNESS". In this menu you can adjust

the brightness of the monitor. Use the t or u keys to adjust brightness. Confirm with OK to save

and exit the menu.

ENGLISH

5. Main Menu

Press the p or q button to select the menu item „VOLUME". In this menu you can adjust the

volume of the monitor. Use the t or u keys to adjust the volume. Confirm with OK to save and

exit the menu.

Press the p or q button to select the menu item „ALARM VOLUME". In this menu you can adjust

the alarm volume of the monitor. Use the t or u keys to adjust the volume. Confirm with OK to

save and exit the menu.

Press the p or q button to select the menu item „POWER SAVING MODE". In this menu you can

define an energy-saving model for the monitor. Choose between two options:

Time Interval:

Sets the monitor in a certain time in the sleep mode if at this time there is no operation on the

monitor. You can select between OFF, half a minute, 2 minutes, 5 minutes or 10 minutes.

Wake up on motion:

Select „Yes", the monitor is automatically turned on again when the camera detects motion.

Select „No", the monitor remains off until you press a button.

ENGLISH