Casit EQ2009 Manuale - Pagina 8
Sfoglia online o scarica il pdf Manuale per Apriporta Casit EQ2009. Casit EQ2009 14. Control box gate's opening
Stampa la pagina8.2)
SETTING TIME OF WORK for two MOTORS (M1 + M2)
(Maximum working time in opening ~ 4 minutes, closing ~ 4 minutes)
REV 1
(red)
REV 1
(red)
REV 1
(red)
REV 1
(red)
REV 1
(red)
REV1
REV 2
(red)
(green)
REV 1
REV 2
(red)
(green)
REV1
REV 2
(red)
REV 1
REV 2
(red)
(green)
REV 1
(red)
REV1
REV 2
(red)
REV 1
REV 2
(red)
(green)
Page 8 of 14
REV 2
SET
SET
REV 2
(red)
REV 2
SET
REV 2
(red)
SET
REV 2
SET
Hold pressed the key PS1 to start the motor 1; release the key in the point in which you
desire to fix the leaf delay in opening.
WARNING! If you don't want to plan any delay shutter in opening send a short impulse
with the key PS1 to pass over the following point
SET
Hold pressed the key PS1 to plan the time of pedestrian opening;
the motor 1 start again in opening and it arrest it to the release of PS1 fixing in that point
the duration of the pedestrian opening
If you don't want to plan any pedestrian opening send a short impulse with the key PS1
SET
to pass over the following point
(green)
Hold pressed the key PS1 to plan the time of work in opening for motor 1.
WARNING! If you want to plan the final portion of the stroke in deceleration, release the
key PS1 in the point in which you desire to continue with the low speed.
If you want to effect the whole stroke with normal speed, maintain pressed PS1 and
release it just at the end of the opening (when limit switch is working FCA 1).
SET
(green)
Hold pressed the key PS1 to plan the last portion of opening for motor 1 in deceleration
and release it just at the end of the opening (when limit switch is working FCA 1).
If the leaf is already completely open because abdicates the deceleration, and if the
arrest has not happened with the limit switch FCA 1, send a short impulse with the key
SET
PS1 to pass over the following point.
(green)
REV 2
SET
Hold pressed the key PS1 to plan the time of work in opening for motor 2.
WARNING! If you want to plan the final portion of the stroke in deceleration, release the
key PS1 in the point in which you desire to continue with the low speed.
If you want to effect the whole stroke with normal speed, maintain pressed PS1 and
release it just at the end of the opening (when limit switch is working FCA 2).
SET
(green)
Hold pressed the key PS1 to plan the last portion of opening for motor 2 in deceleration
and release it just at the end of the opening (when limit switch is working FCA 2).
If the leaf is already completely open because abdicates the deceleration, send a short
impulse with the key PS1 to pass over the following point,
SET
(green)
The leds will visualize beside the state.
If the gate is not closed hold pressed the key PS2 up to the complete
closing of the motor 2.
If the gate is closed to pass over the following point
The leds will visualize beside the state.
If the gate is not closed hold pressed the key PS2 up to the complete
closing of the motor 1 (one leaf).
If the gate is closed to pass over the following point
The leds will visualize beside the state.
At the end of the stroke in opening of the motor 1 the state of the
leds is that represented to the left side
EQ2009 R 1.6 1.8
Rev. 02 del 2/05/2011