DANLERS CEFL PIR Note sull'installazione - Pagina 4
Sfoglia online o scarica il pdf Note sull'installazione per Apparecchiature di illuminazione DANLERS CEFL PIR. DANLERS CEFL PIR 15. Ceiling flush mounted pir occupancy switch
Anche per DANLERS CEFL PIR: Manuale di avvio rapido (2 pagine)
Stampa la pagina
Creating New Profiles
For optimising energy saving and end user comfort PROFILES can be configured to suit a
range of switching and dimming requirements.
NOTE: Dimming features can only be achieved if the lighting circuit has a suitable
DALI or 1-10V dimmable ballast installed as per the manufacturers instructions.
-
Launch home page then press 'Profiles' button. New screen appears (Diagram 4), press
'CREATE NEW PROFILE'. New screen appears with 'Default' and a range of pre-
configured templates. (Diagram 5). Any of these can be edited, renamed or duplicated
to personal preference.
-
Press 'default' button to create a new profile. New screen appears 'New Profile'
(Diagram 6). Type in your chosen profile name (1-16 characters - letters and numbers
only) AND if required, select either 'Switching Only' or the appropriate dimmable ballast
type. Press 'OK'.
-
The screen returns to the home page with the new profile now indicated as the
'PROFILE IN USE'.
Duplicate a PROFILE:
-
Press 'Profile' button then select the profile to be duplicated. Profile appears 'IN USE'.
-
Press the 'Duplicate' button at bottom of screen. Over type if you do not wish that to be
the name. Maximum 30 characters with NO spaces. Press 'OK'.
Delete a PROFILE:
-
Press 'Profile' button then select the profile to be deleted. Profile appears 'IN USE'.
-
Press the 'Delete' button at bottom of screen. 'Delete (original profile name)'. Press
'Delete'.
Rename a PROFILE:
-
Press 'Profile' button then select the profile to be renamed. Profile appears 'IN USE'.
-
Press the 'Rename' button at bottom of screen. Type in new name. Maximum 30
characters with NO spaces. Press 'OK'
Sharing and Exporting PROFILES:
To ensure your PROFILES are protected for future use it is recommended they are shared /
exported onto other devices.
-
Press 'Profile' button then select the profile to be shared. Press 'Share' (bottom left).
New screen appears with all of the programs your mobile / tablet could 'share with'.
These programs are determined by what is available on your device. Choose your
preferred option and follow the prompts. See Diagram 7.
-
Emails automatically have the Profile in use selected as an attachment for exporting.
The user just has to fill in the address details and send.
Importing Profiles
If a PROFILE has been sent / saved to your mobile / tablet by email you can import
the file by simply pressing the 'Preview' option from the Email if available and the file is
automatically added to the PROFILES list on your ControlZAPP software. Options are
determined by what is available on your device such as Email, Gmail, Bluetooth, Drive, WiFi
Direct, Dropbox etc. Choose your preferred option and follow the prompts.
If the file has been saved in the 'Downloads' folder of your mobile / tablet simply click
on the file and it will be automatically added to the PROFILES list on your ControlZAPP
software.
NOTE: ControlZAPP Profiles can be saved on other devices such as Mac or PC but the
file cannot be opened. To add the file to your ControlZAPP Profiles you have to be able to
Preview / Save the file on your mobile or tablet.
Template Profile
PROFILE TEMPLATES have also been provided to suit a range of typical installations.
-
Press 'Profiles' button then press 'CREATE NEW PROFILE' button on the new screen.
The list of 6 PROFILE TEMPLATES with brief descriptions are listed plus the default
setting and are intended as a basis for basic energy saving scenarios.
-
PROFILE TEMPLATES options can be edited, renamed, duplicated or deleted.
NOTE: To special order DANLERS can design PROFILES to your specification
at our standard commissioning rate. Contact us for further information.
DIAGRAM 5
DIAGRAM 6
DIAGRAM 7
PAGE 2