aevit SMART-SHIFT Manuale di installazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di installazione per Automobile Accessories aevit SMART-SHIFT. aevit SMART-SHIFT 16.

M1-1

1. OVERVIEW

The EMC Smart-Shift answers all of the "shifting" needs of the individual, the installing dealer, and the driver

rehabilitation professional. This system can be installed in almost any vehicle equipped with a cable actuated

automatic transmission to remotely operate the vehicle's shifting functions. The Smart-Shift is operated by the

four illuminated tactile buttons on the front of a small (5.5" x 3.25" x 1") touchpad. Each button is positioned

below the icon representing the corresponding gear which it operates. Each icon has an LED to signal when

the actuator has reached the programmed position.

The Smart-Shift incorporates positional feedback so that the actuator can be automatically positioned in up to

seven selector choices; Park, Reverse, Neutral, Drive, Drive3, Drive2, and Drive1 (Drive3, 2, & 1 are not available

for all vehicles). When the vehicle is in Park and any other key is depressed, the actuator will move the shifter

cable to the selected gear, stop automatically and illuminate the LED indicator. No more missed gears or wait-

ing in traffic for the actuator to slowly move. In addition, the multifunctional "D" button can be programmed

for up to four different Drive positions (Drive, Drive3, Drive2 & Drive1).

Operation of the system is quite simple. While the vehicle's ignition is ON and the brakes are applied, press any

of the four buttons to move the vehicle's transmission to the selected gear. To activate Drive 3, 2 & 1 simply

press the Drive key while in Drive. Each time the key is depressed it will cycle through each position. The "D"

LED will continually flash while you are in Drives 3, 2 & 1, with each one flashing at a different rate. To exit any

of the low Drives, just depress any key, and the vehicle's transmission will be switched to that position. The

Smart Shift requires two inputs for the system to operate; 1) the ignition of the vehicle must be "On" and 2) the

brakes must be applied.

The Smart-Shift includes a Touchpad, Actuator (and mounting bracket), Controller Module, Vehicle Interface

cord, a telco cord, and an Universal installation kit. The actuator will need to be mounted in such a way that

it will interface with the vehicle's transmission shift cable. This can be done by mounting the actuator and

bracket to the vehicle to provide solid connection that the transmission cable will reach. The Universal instal-

lation kit includes additional, smaller mounting brackets for mounting the actuator to the vehicle along with

hardware and a cable bracket to secure the tranmission shift cable to the actuator.

SMART-SHIFT INSTALLATION