Audiopax 5 Manuale - Pagina 9

Sfoglia online o scarica il pdf Manuale per Amplificatore Audiopax 5. Audiopax 5 10.

●

High power solid-state amplifiers tend to operate best with the rear switch

in the "low" position and the Timbre Lock

●

High-power push-pull tube amplifiers usually have their best settings

between the two extremes (between -10 and -30).

One last important note: Model 5 is an inverter preamplifier, ie the output signal

will have inverted polarity relative to the input. When coupled to an inverter amplifier

(as is the case with all Audiopax amplifiers) the preamplifier/amplifier combination will

preserve the polarity of the input signal. If non-inverting amplifiers are used, absolute

polarity restoration can be achieved by reversing it at the source (if available) or simply

reversing the polarity of the loudspeaker cables in both channels (left/right). We

encourage system testing with both configurations, as the best optimization of the

residual distortion spectrum may occur in either case.

at high values (between -30 and -40).