CASO DESIGN WineSafe 24 Smart 10719 Manuale operativo originale - Pagina 16
Sfoglia online o scarica il pdf Manuale operativo originale per Elettrodomestici da cucina CASO DESIGN WineSafe 24 Smart 10719. CASO DESIGN WineSafe 24 Smart 10719 19.
Stampa la pagina
7.2 Fault indications and rectification of faults
The following table assists in localizing and rectifying minor faults.
Fault
Wine refrigerator does not
operate.
Your
device is
not
enough or it does not reach
the adjusted temperature:
The light does not work.
Vibrations.
The wine refrigerator seems
to make to much noise
The
door
will
not
properly.
LED could not display.
LED display error - Lo
Buttons are not functional.
Compressor will not start
Compressor re-start
Dew
on
the
surface
cabinet：
Liquid sound
Not plugged in or using different voltage. The circuit breaker
tripped or a blown fuse.
cold
Check the temperature control setting. External environment
may require a higher setting. The door is open too often.
The door is not closed completely. The door seal does not
seal properly. The wine refrigerator does not have the
correct clearance. Defrost the device.
Check the service center.
Check to assure that the wine refrigerator is level.
The wine refrigerator is not level. Check the fan.
close
The wine refrigerator is not level. The door is reversed and
not properly installed. The seal is weak. The shelves are out
of position.
Main control board does not work. PCB Problem. There is
some problem with the plug.
Weak quality of display. Temperature point is out/off. Check
the service center.
Temperature controller panel is damaged.
Room temperature is lower than desired temperature.
Compressor will stop working when cooling system in the
cabinet reaches
working when the desired temperature is achieved. Allow a
minimum 5 minute interval before re-starting.
of
The surface of wine cabinet especially the glass door
appears to have some frost if item is in a damp room. This is
due to the moisture in the air coming into contact with the
cabinet. Please wipe it away with dry cloth.
（1) The sound of compressor when starts or stops working
（2) The flowing sound of refrigerant in the refrigeration
system
（3) The evaporating sound of refrigerant in the evaporator
Possible Cause
preset temperature, and will re-start
16