aevit VIC 2.0 Manuale di installazione e funzionamento - Pagina 13

Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Unità di controllo aevit VIC 2.0. aevit VIC 2.0 17. Voice interactive controls

Stampa la pagina

4.3 TrAININg VIC 2.0

TrAININg STep 1

Once Training Mode is entered VIC 2.0 will say "Training Mode is selected. Please press the listen switch

now."

Follow the verbal instructions from VIC 2.0 for Training, Part 1. She will guide you through the train-

ing of (17) different commands including commands to raise and lower the speaker volume. Below is

an example of the training:

VIC 2.0: "Please say LEFT."

BEEP

(wait one second)

Client: "LEFT"

VIC 2.0: "Please repeat LEFT."

BEEP

(wait one second)

Client: "LEFT"

TrAININg STep 2

Once Training Part 1 is completed, VIC 2.0 will say: "Training mode part 2." In this mode, follow the

instructions from VIC 2.0 as she will guide you through the recognition portion of the training.

If for some reason you are unable to complete the training and must start over, you must turn the

training mode OFF from the User Status screen and wait for VIC 2.0 to say "Training Aborted." Then

you must turn Training Mode back ON to start over.

TrAININg STep 3

After Training, Part 2 has been completed

and all functions have been recognized by

VIC 2.0, she will say,

"Training completed"

Then she will ask you at this time to turn the

VIC Training Mode Selection to the OFF po-

sition. Once the VIC Training Mode Selection

is in the OFF position, VIC 2.0 will say,

"You now have voice activation."

This completes the training of VIC 2.0

4-3

VIC 2.0 INSTALL MANUAL