audiophony MOJOcurveXL DSP Manuale d'uso - Pagina 16
Sfoglia online o scarica il pdf Manuale d'uso per Sistema di altoparlanti audiophony MOJOcurveXL DSP. audiophony MOJOcurveXL DSP 20. Active curve array system with mixer
Stampa la pagina
English
Note: If you press and hold the multi-function key (4) for more than 5 seconds, you lock the menu.
The display then shows
To unlock the menu, press and hold the multi-function button again for more than 5 seconds.
4.3 - TWS mode operation :
The Bluetooth TWS mode allows you to connect two MOJOcurveXL together in Bluetooth to broadcast in stereo
from a single Bluetooth source (phone, tablet, ... etc).
Switching on the TWS mode :
1 - If you have already paired one of the two MOJOcurveXL, go to the Bluetooth management of your source and
deactivate Bluetooth.
2 - On both MOJOcurveXL activate the TWS mode. A "Left Channel" or "Right Channel" voice message will be
emitted to confirm that the TWS mode is active.
3 - Reactivate Bluetooth on your source and pair the device named MOJOcurveXL.
4 - You can now play your music in stereo on two MOJOcurveXL.
Note: The TWS mode only works with a Bluetooth source.
Page 16
MOJOcurveXL - Active curve array system with mixer, BT and DSP
OFF : The display never dim
ON : After 8 seconds the display turns off.
Allow to load recorded preset
Allow to record a preset
Erase the recorded preset
Adjust the brightness of the display from 0 to 10
Adjust the contrast of the display from 0 to 10
Reset all the adjustments. Default factory setting is MUSIC mode.
Firmware version information
Exit of the menu