CASO DESIGN Coffee One Manuale operativo originale - Pagina 14

Sfoglia online o scarica il pdf Manuale operativo originale per Caffettiera CASO DESIGN Coffee One. CASO DESIGN Coffee One 18.

4.5 Manual mode

If the plug is disconnected to the socket before using:

Plug in the coffee maker, touch the "ON/OFF" button. The display shows a solid blue light and

the coffee maker switches on. If the plug is connected to the socket before using:

Touch "ON/OFF" button, the LED display is activated, which will show the current time, then

touch "ON/OFF" button again, the light over "ON/OFF" button will be on, coffee maker start to

brew coffee. When brewing, if touch the "ON/OFF" button, the light over "ON/OFF" button will

be off, and the coffee maker stop brewing.

Please note

► At any status, long touch 2 seconds of the "ON/OFF" button , the LED display and all

indicator light will be off, and coffee maker completely stop work.

Touch the "PROG" button: the LED display blink "00 00" with blue color, the point" :" show a

solid blue light. (The display unit goes back into status before if no setting is entered within 5

seconds). Touch the "H" button to set the time. Touch the "M" button to set the minutes. The

setting is validated automatically after 5 seconds.

Touch the "AUTO" button to activate the program function. The light over "AUTO" button show

a solid blue light. At the time programmed, the light over "ON/OFF" button show a solid blue

light and the coffee maker starts to operate.

Please note

► When you touch, after programming the time, the "ON/OFF" button (instead of "AUTO), the

light over "ON/OFF" button show a solid blue light and the coffee maker starts to operate

directly.

► You can cancel the program at any time by touching the "AUTO" button. The light over

"AUTO" button will turn off. To reactivate the program, touch the "AUTO" button again.

► Note on the two operating modes: The coffee maker automatically completely stops

operating after about 70 mins, if you haven't stopped it at the end of the cycle by long

touching the "ON/OFF" button, and the light over "ON/OFF" button turns off, LED display

turns off.

At any status, touch the "keep warm high/low" button, the keep warm mode will change from

high temperature mode -- low temperature mode --- high temperature mode -..... When

at low temperature mode, light over "keep warm high/low" button is off. When the high

temperature mode is rated, the light over "keep warm high/low" button is on with a blue light.

Please note

► After brewing, the appliance will keep warm 30 minutes, then automatically turn off.

caso