CASO DESIGN HW 400 Manuale operativo originale - Pagina 10
Sfoglia online o scarica il pdf Manuale operativo originale per Distributore d'acqua CASO DESIGN HW 400. CASO DESIGN HW 400 16. Instant boiling water dispenser
•
Before connecting the device, compare the connection data (voltage and
frequency) on the rating plate with those of your electrical network. This data must agree in
order that no damages occur in the device. If in doubt, ask your qualified electrician.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
•
Make sure that the power cable is undamaged and has not been installed
under the ice maker or over hot or sharp surfaces.
•
The electrical safety of the device is only guaranteed if the device is connected
to a properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a missing
or damaged protective conductor.
3.7 Overheating protection & reset
The appliance is equipped with an overheating protection
facility. If the temperature of the appliance exceeds the
critical limit the appliance shuts off further power supply for
Please use enclosed reset-key for the reset-button.
4 Design and Function
In this chapter, you'll find important information on the design and function of the device.
4.1 Overview
Warning
► Warning symbol: hot steam.
► Caution hot steam can escape at device. Risk of burns.
safety reasons.
Remove the water tank. You can
see the reset button.
By pressing the reset button (1)
the appliance can be reactivated.
Unplug the device before reset.
When the device is only producing
cold water please press reset
button.
10