Consort CN2FSL Manuale di installazione e controllo - Pagina 3
Sfoglia online o scarica il pdf Manuale di installazione e controllo per Riscaldatore Consort CN2FSL. Consort CN2FSL 4. Sl wireless controlled fan convector heaters
Stampa la pagina
Operation
When the appliance is connected to the mains supply, the LED indicator will light up green, showing
that the power is available to the unit.
When the heat output has been enabled by a controller, the LED indicator light will turn red.
This heater can only be used in conjunction with any SL wireless controller. Each SL controller can
control any number of heaters providing they are in the RF range.
SLPB
Please refer to the SL user and operating instructions for full operational details.
Variable Thermostat ( only for CN2FSLT model )
The heater is fitted with a variable thermostat which works in conjunction with the SL controllers. This
allows the comfort room temperature set by the SL controller to be lowered - it can not increase the
comfort temperature. The adjusted comfort temperature is only applied to an individual heater not to
any other heater controlled by the SL controller.
If the comfort temperature has not been enabled on the SLPB controller the variable thermostat can set
the operating temperature between 5°C and 31°C when the button on the SLPB controller has been
pressed.
The variable thermostat is located on the right hand end side of the heater, behind a cover. The
thermostat knob is numbered. The lower the number set the cooler the operating set back temperature
becomes.
Note frost protection is enabled through the SL controller only, and not by the variable thermostat. By
setting the variable thermostat to the frost symbol you have set the comfort temperature to 5°C, this
would also lower the operating set back temperature should the SL controller set back temperature be
set at a higher temperature.
SLVT
SL wireless controllers
SLVTB
3
SLTI
62001251 Iss 02