Aeware in.k400 Manuale - Pagina 11
Sfoglia online o scarica il pdf Manuale per Tastiera Aeware in.k400. Aeware in.k400 14. Compact keypad for in.xe spa systems
Anche per Aeware in.k400: Manuale (12 pagine)
Stampa la pagina
functions
Setting the time
Enter Programming mode by
holding Prog. key pressed
down for 3 sec. The display will
show the current time setting.
Setting the hour:
Use Up or Down arrows to
change hour setting (AM/PM).
Setting the minutes:
Press Prog. key a second time.
Use Up or Down key to change
hour setting.
10
Setting fi lter cycle start time
To program the fi lter cycle, you
must enter these parameters:
the start time, duration and
frequency. During a fi lter
cycle, pumps run for one min-
ute to purge the plumbing,
then Pump 1 runs for the
programmed number of hours.
Press Prog. key a third time.
The display will show FSxx, with
"xx" representing the starting
hour.
Use Up or Down key to change
setting.
Setting fi lter cycle duration
Press Prog. key a fourth time.
The display will show Fdxx, with
"xx" representing the duration
in hours.
Use Up or Down key to change
setting.
in.k400
Filter cycle frequency
Press Prog. key a fi fth time.
The display will show FFxx, with
"xx" representing the number of
fi lter cycles per day (up to 4).
Use Up or Down key to change
setting.