Audiopipe DJAP-612PB Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Audiopipe DJAP-612PB. Audiopipe DJAP-612PB 16. Djap series hybrid portable pa system

sound. The EQ function will be activated automatically as soon as you operate your DJAP .

15. MAIN MIX LEVEL Control

This control is used to adjust the overall volume of the main mix output. The adjustable range goes from -

16. OUTPUT LEVEL LED

The 4-segment LED meter is used to indicate the output level.

17. POWER LED

This LED lights up when the unit is powered on.

18. MAIN OUT Jack

This jack is used to output the main mix signal to an external unit.

19. MONITOR OUT Jack

This jack is used to connect the input signal of an external monitor amplifier or active monitor speaker.

20. FOOTSWITCH

You can connect an external footswitch to turn the onboard effect module on/off, via the 1/4" phone jack.

21. USB PLAY-PAUSE

You can connect an external footswitch to control MP3 player to play or pause.

22. FX SEND Jack

This jack is used to sent out the signal from AUX bus.

23. FX RETURN Jack

This jack is used to return the sound of an effect unit to the main mix. You can also use it as an extra auxiliary input.

3.2 DSP Section with 24-Bit Digital Effects

Your UPA features a special 100-preset digital effect, for further details please refer to the

following content.

24. DISPLAY

Displays the selected preset.

25. PROGRAM (PUSH)

Adjust this knob to select the right effect you wish to perform. There are total 100 options for

you: Vocal, Echo, Plate and versatile two-effect combination. When you are satisfied with the

chosen preset, please push this knob to store this preset.

26. DSP MUTE Button

This button is used to activate/deactivate the effect facility. Sometimes, you can also use the

FOOTSWITCH jack for convenient operation.

27. CLIP/MUTE LED

This LED lights up when the input signal is too strong. In case of the digital effect module being

muted, this LED also lights up.

28. AUX/DFX RET Control

This control is used to adjust the volume of FX RETURN and MAIN OUTPUT effect.

DJAP-61PB DJAP-615P

to +10dB.