Audioplex A+B-2 Manuale di installazione

Sfoglia online o scarica il pdf Manuale di installazione per Interruttore Audioplex A+B-2. Audioplex A+B-2 2. Selector switch

INSTALLATION MANUAL

A+B-2 & A+B-2D SELECTOR SWITCH

The A+B-2 and A+B-2D selector switcher provides the ability to choose between two

separate sources such as a receiver or an amplifier. The unit allows the user to choose between

two separate stereo speaker pairs. This switching enables the music to be transferred to speaker

pair A in one location or speaker pair B in another location or simultaneously on both pairs in

each location. The in-wall design allows the unit to be mounted in any convenient location

between the speakers and receiver/amplifier.

Power Rating:

5 Amps continuous

Connectors:

Screw tight type, non-removable

Mounting:

Fits most standard single junction boxes

Contacts:

Silver cadmium

Note that the left and the right grounds (-) are completely seperate to avoid instability

problems with amplifiers which have isolated grounds. Care should be taken that speaker

impedance should match amplifier. Any problems can be safely eliminated with our

MATCHIT(TM) or OPTIMATCH(TM) impedance correctors.

To make connection, strip about 1/4" of insulation from the wire ends, and twist the

loose strands together tightly so that no loose wire strands stick out to cause possible short

circuits! Insert the wires from the amplifier into the INPUT openings of the connector, hot to hot

and ground to ground, then tighten screws. Similarly, connect speaker wires to the control

OUTPUT openings.

Your AUDIOPLEX TECHNOLOGY A+B-2 & A+B-2D is covered by a LIFETIME

warranty against any defects in workmanship and materials. Any defects will be remedied

without charge for labor or parts.

Damage incurred by shipping or accident is not considered to be a defect, and not covered by

this warranty. AUDIOPLEX TECHNOLOGY, is not responsible for defective operation caused

by abuse or by modification or service by any unauthorized person or agency.

The unit must be properly installed and operated according to instructions for the warranty to

apply. Any necessary servicing must be done by AUDIOPLEX TECHNOLOGY. The products

must be returned expenses prepaid, with written authorization from the company. The product

must be shipped with the proof of purchase and in the original carton and packing material to

avoid damage.

TECHNOLOGY

SPECIFICATIONS:

INSTALLATION:

WARRANTY:

1999 - 4/22/99